Back to Blog
September 28, 2026·6 min read

How to Recycle IT Equipment: A Practical Guide for Businesses

Every IT department eventually faces the same pile: retired laptops, dead switches, decommissioned servers, monitors that no longer match the new desks. None of it can go in the trash — in California, most electronic devices are classified as universal waste and are banned from landfill disposal. But between the data on the drives and the value in the components, "just recycle it" isn't a plan. Here's a practical, step-by-step process for recycling IT equipment correctly.

Step 1: Inventory Every Asset

Before anything leaves the building, list what you have. A basic asset inventory — device type, quantity, approximate age, and whether it holds a hard drive or storage — gives you three things: a record for your compliance files, a way to confirm nothing walks off, and the information a recycler needs to quote and plan your pickup.

Don't forget the equipment that hides in plain sight: network switches, UPS battery backups, VoIP phones, copiers, and that closet of "we'll deal with it later" monitors. Printers and copiers often contain hard drives too.

Step 2: Decide What Can Be Reused vs. Recycled

Not everything needs to be shredded. Equipment that is working, relatively current, and easily wiped can be refurbished and remarketed through an IT asset disposition (ITAD) program — returning part of its value to your business. Older or broken equipment moves into the recycling stream, where commodities like circuit boards, copper, and aluminum are recovered.

  • Reuse candidates: recent-model laptops and desktops, working monitors, network gear
  • Recycle candidates: failed drives, dead power supplies, CRT monitors, obsolete or damaged hardware

The dividing line is simple: if the device can't be reliably sanitized and resold, it should be recycled — with its data destroyed either way.

Step 3: Destroy the Data — On Every Drive

This is the step that gets companies in trouble. Deleting files, reformatting, or factory-resetting a device does not remove data in a way that stands up to recovery tools — a point emphasized by both the FTC and NIST SP 800-88, the federal standard for media sanitization.

Before any IT equipment leaves your control, every storage device must be:

  • Sanitized — cryptographically erased or overwritten to NIST 800-88 standards, or
  • Physically destroyed — shredded so the drive's platters can't be read

For drives containing sensitive records, physical shredding is the gold standard: it's verifiable on sight. Whatever method you choose, your recycler should issue a certificate of data destructionlisting what was destroyed and how — keep it with your compliance records.

Step 4: Choose a Certified Recycler

Handing hardware to "some guy with a truck" is how corporate equipment ends up in informal overseas recycling markets — with your data intact. Work with a licensed, CalRecycle-authorized recycler who can document where your material goes. Ask three questions:

  • Do you provide chain-of-custody documentation from pickup to final processing?
  • How is data destroyed, and what certificate do I receive?
  • Is any material exported or landfilled?

Step 5: Schedule Pickup and Keep the Paperwork

Most businesses don't need to haul anything anywhere. A qualified recycler will collect palletized or boxed equipment directly from your site — free of charge for qualifying loads. If your business generates more than two pallets of electronic recycling material, ask about rebates: dense material like servers and circuit boards has recoverable commodity value that can come back to you.

When the pickup is done, file three documents with your records: the asset inventory, the certificate of data destruction, and the recycling receipt. Together they close the loop — proving the equipment was accounted for, the data was destroyed, and the material was recycled responsibly.

Common Mistakes to Avoid

  • Trusting a quick factory reset. Data survives simple wipes and can be recovered from "deleted" drives.
  • Forgetting copiers and printers. Modern multifunction devices store documents on internal drives.
  • Letting equipment accumulate. Hardware stored in closets is still a data-liability — and a fire risk with lithium batteries.
  • No documentation. If you can't show where a device went, regulators and auditors assume the worst.

Make It a Process, Not a Project

The companies that handle IT retirement best treat it as a standing process, not an emergency cleanout. Designate a point of contact, keep a running inventory, and schedule pickups on a regular cycle. When your next refresh rolls around, retiring the old equipment takes an afternoon — not a quarter.

Ready to clear the backlog? Schedule a free pickup for your retired IT equipment, or ask us about certified data destruction and rebates for bulk loads.

Sources: NIST SP 800-88 Rev. 1 — Guidelines for Media Sanitization; U.S. EPA — Sustainable Management of Materials: Electronics; California Department of Toxic Substances Control — Universal Waste Rule; FTC — Disposal of Consumer Report Information.

Ready to Recycle Your Electronics?

Schedule a pickup anywhere in the Inland Empire and Orange County. Free pickup for homes & businesses with 5+ qualifying items. Fast, reliable, and eco-friendly electronics recycling.